How to Make a Vibrator at Home
homemade vibrator
I go to work, add some of this picture, but now I will try to provide some very good instructions.
You need:
A green bananas
A bullet vibrator, I would recommend with a rope (this will run you about $ 11) a
Volume 1 Tape
A new condom, if you want a used one is just nasty! : Adult11:
A small rubber band like a small pig tails or whatever, you can get $ 1 below the 100 Wal-Mart
A knife in the kitchen to find this, if you do not have a knife or by a dollar store and access your kitchen linked to it!
Step 1: Cut off the banana (less than 1 / 4 inch down to keep a sharp round cut emerging from the top step, where the lower right corner to expand the top..
Step 2: remove the peel from top to bottom still far off.
Step 3: banana peel to accidentally broke the banana skin, and if you break it will be fine, which is why we have the tape!
Step 4: about 1-1 1 / 2 inch banana scoop out a point, it is the same size as your bullets. Also a line of flute at the banana scratch all the way to the banana sitting on the bottom.
Step 5: bullet vibrator in the banana, then at the top / tip started to take every means to reduce the banana about 1 / 8 inch of the bottom, but no more left.
Step six: Once the bananas are not rough edges taped, placed in its condoms. Ties and security to issue condoms and vibrators bottom line. Ensure that condoms are not full of air, it is in the vibration comfort.
Step Seven: Enjoy!
People still remember that banana is a fruit, they will be broken: mad: Once you finish your banana to use vibrators, please take it apart carefully and discard all the items except the bullet vibrator. You can always re-use on other occasions, the bullet!
Please let us know that you and your DIY home-made sex toys! Women make a vibrator yourself!